… high mechanical properties and good weldability, work hardening and cold-tough to -196°C. … 19% Cr / 9% Ni / 7% Mn, ISO 15608: 8.1 Cr ≤ 19 % …

… resistance. Due to the components Fe, Mn and Sn. this type is the so cold “low fuming bronze”  Flux/Paste: CEWELD Universal-Flux … Brass, …

… Good arc restriking even with cold wire tip, suitable for robot applications. Ideal for use in the …

… of sensitive base material preheating is recommended at 300-400°C. Old Hardfacing layers should be removed, clean or grind properly before …

… industries. It is used for combustion cans, transition ducts, flame holders, thermocouple sheaths, and other important gas turbine …

… L-Ag27 is a Very good flowing, low-melting silver hard solder for operating temperatures from -200 °C to Max. 200 °C (without …

… OA 4370 or OA MnCr is recommended in case of sensible basematerial or old layers. Weldable without protective gas.  … HRc 55-58, Cement …

… corrosion resistance, and workability. It can be strengthened by cold working, but not by heat treatment. … Al99,0 Al.99,5 Al.99,7 E-Al., …

… with CEWELD® OA 4370 or CEWELD® OA MnCr is recommended in case of old layers or critical base metals.. Equivalent in SMAW: CEWELD® Dur …

… requires no buffer layer except on materials considered critical or old hardsurfacing layers. In this Situation OA 4370, ER 100 SG  is …